Home> Rangi> What is the difference between a one inch dip welded wire mesh and a conventional welded wire mesh?

What is the difference between a one inch dip welded wire mesh and a conventional welded wire mesh?

November 16, 2022
One-inch dip-welded welded wire mesh is made of high-quality Q195 low-carbon steel wire, and then surface-passivated and plasticized with PVC plastic coating. It has better adhesion with wire mesh, flat mesh surface, uniform mesh and solder joints. Firm, local processing performance is good, stable, corrosion resistance, color can be customized according to actual requirements.
Product Name: One inch dip welded wire mesh http://

Product technology: One-inch dip-welded welded wire mesh is made of high-quality Q195 low-carbon steel wire. Then it is surface-passivated and plasticized with PVC plastic coating. It has better adhesion with wire mesh, smooth mesh surface and uniform mesh. The solder joint is firm, the local processing performance is good, stable, and the corrosion resistance is good. The color can be customized according to actual requirements.

General specifications:

Wire diameter: 2.5-5.0mm

Mesh: 25.4-200mm

The maximum width can be 3m, and the length is customized according to the actual requirements of customers.

Dip powder knowledge and use

1. Polyethylene thermoplastic powder coating, also known as polyethylene powder resin coating, is an anti-corrosion powder coating which is prepared by high-pressure polyethylene (LDPE) as a base material, adding various functional additives and color preparation, and has excellent dip coating layer. It has chemical resistance, anti-aging, impact resistance, bending resistance, acid resistance, salt spray corrosion resistance and good surface decoration properties.

Second, the conventional dip conditions:

1. The mesh is derusted and degreased and heated to 350±50°C (the specific heating temperature depends on the heat capacity of the mesh, determined by the test).

2. Dip the mesh into the fluidized bed for 10-12 seconds, heat to 150 °C-230 °C, take out the surface leveling, and finally obtain the dip mesh after cooling.

Another molding plastic powder, no fluidized bed.

Third, the main purpose of dip nets:

Highway guardrail net, railway fence net, airport fence net, garden fence net, community fence net, villa fence net, civil house protection net, hardware craft rack, column cage, sports fitness equipment, etc., park, community and other guardrails, bicycle baskets , shelf, hanger, refrigerator, grille surface coating.

Fourth, dip net features: http://

Dip thickness between 0.5-3mm, has strong impact resistance, and the protection period is longer, beautiful and durable.

The color of dip soldering mesh mainly includes: dark green, grass blue, black, red, yellow and other colors for users to choose. This product uses an advanced two-layer protection system to achieve very good adhesion, bright color and full color. Not only can the service life of the mesh be greatly improved, but also the inadequacy of the decorative effect of the hot dip galvanized welded wire mesh is improved.

Conventional dip welded wire mesh:

Plastic coated welded wire mesh is a kind of welded wire mesh product which is welded by electroplating or hot-plated iron wire and then dip-coated by PVC powder through high temperature and automatic production line. It is mainly used for supermarket shelves, indoor and outdoor decoration, poultry breeding, flowers and trees. Fence, outdoor for the isolation of villas and residential walls, the products have bright colors, beautiful appearance, anti-corrosion and anti-rust, no fading, anti-ultraviolet and so on.

Our factory can produce plastic welding mesh products of various colors, mainly including: dark green, grass blue, black, red, yellow and other colors for users to choose. This product uses an advanced two-layer protection system to achieve very good adhesion, bright color and full color. Http://

The plastic coated welded wire mesh must be subjected to very high quality inspection. The quality of the product must meet the requirements of the national ASTM F668-99a and ASTM Frame work F1063 standards, which not only greatly improves the service life of the mesh, but also improves the hot dip galvanizing. The inadequacy of the welded wire mesh in the decorative effect.
Http://news.chinawj.com.cn What is the difference between a one inch dip welded wire mesh and a conventional welded wire mesh? Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn What is the difference between a one inch dip welded wire mesh and a conventional welded wire mesh?
Whakapā mai

Author:

Mr. Kevin

Phone/WhatsApp:

+8613165553600

Hua Rawa
You may also like
Related Categories

Īmēra ki tenei kaiwhakarato

Kaupapa:
Īmēra:
Karere:

Your message must be betwwen 20-8000 characters

Whakapā mai

Author:

Mr. Kevin

Phone/WhatsApp:

+8613165553600

Hua Rawa
Ka whakapā atu matou ki a koe

Whakakiia etahi atu korero kia taea ai e koe te pa ki a koe kia tere ake

Tauākī Tūmataitinga: He mea tino nui to maatauranga ki a matou. He kupu nui to maatau kamupene kia kaua e whakaatu i o korero whaiaro ki tetahi atu whakaaetanga.

Tukua